Inorganic nano anti cracking and anti-seepage agent
Corrosion resistant and does not release harmful substances
Model: 5
The construction method of this product is the same as that of ordinary concrete construction.
Classification:
Inorganic Nano Admixtures
Keyword： Inorganic nano anti cracking and anti-seepage agent
Detail
FEM inorganic nano crack resistant waterproofing agent is a multifunctional composite special additive for self waterproofing of concrete structures. Its unique nano level active dispersion factor can greatly improve the durability of concrete, suppress concrete cracking, and form high self compacting waterproof and impermeable concrete, truly realizing the self waterproofing of concrete "body type" structure.
Product Features
Through authoritative testing units in the fields of civil construction, municipal engineering, transportation, water conservancy, chemical engineering, and military nuclear power, as well as hundreds of engineering application tests, after adding this product to concrete:
Crack resistance: The early shrinkage value can be reduced by more than 30%, the tensile strength of concrete can be increased by (15-25)%, the ultimate tensile value can be increased by (15-25)%, the elastic modulus can be reduced by (5-10)%, and the maximum peak time of early hydration heat can be delayed by more than 24 hours.
Compaction: impermeability grade ≥ P20.
Durability: The freeze-thaw cycle can reach more than 300 times.
Self compaction: The slump loss rate is reduced by more than 30%, ensuring the construction performance of concrete while also possessing the function of self compaction.
Corrosion resistance: The electrical flux is reduced by more than 20%, and the sulfate corrosion resistance coefficient is greater than 0.85, achieving the function of acid and chloride ion resistance.
Execution standard
JG/T 474-2008 "Mortar and Concrete Waterproofing Agent" T/ASC6006-2019 "Inorganic Nano Crack Resistant and Seepage Reducing Agent for Concrete"
Instructions for use
The construction method of this product is the same as that of ordinary concrete construction. When mixing, add this product and mixing water together to mix; The demoulding time for using this product should be at least 3 days.
Recommended dosage
The dosage is 1.0-2.0% of the adhesive material, and the specific dosage should be determined according to the actual requirements of the project. Attention: The original solution of this product should not be directly mixed with any additive original solution. Transportation and Storage: This product is non-toxic and harmless, and is non flammable and explosive. It is stored at room temperature and pressure in the warehouse and can be transported as general cargo. Shelf life: 24 months, with a small amount of sediment, shaking well does not affect the adaptation effect.
Our factory
Related Products
Message
If you have any questions, please contact us!