Products
Polycarboxylate high-performance water reducer
Model: 1
The product can be compounded with air entraining agents, retarders, etc. to improve the construction performance of concrete.
Polycarboxylate high-performance water reducer (slump retaining type)
Model: 2
FEM polycarboxylate high-performance water reducer introduces strong polarity genes into the main or side chains of the molecule, with a comb like structure that regulates the polymer molecular weight to meet different requirements.
Polycarboxylate high-performance water reducer (water reducing type)
Model: 3
The mineral admixtures such as fly ash, mineral powder, and silica powder used in the preparation of high-performance concrete have good adaptability;
Concrete anti segregation agent (adsorbent)
Model: 4
Concrete anti segregation agent is a composite new material developed for the segregation, bleeding, and poor workability of concrete mixtures.
Inorganic nano anti cracking and anti-seepage agent
Model: 5
The construction method of this product is the same as that of ordinary concrete construction.
Inorganic water-based penetrant crystallization agent
Model: 6
FEM inorganic water-based penetrating crystallization agent is a water-based waterproof material containing proprietary catalysts and active chemicals.
Marine anti-seepage and anti-corrosion agent
Model: 7
It can increase the gel in the concrete, reduce the porosity, and effectively improve the structure of the grout bone interface;
Model: 8
Dosage: The commonly used dosage of FEM concrete rust inhibitor is 2% -4% of the mass of the cementitious material, subject to experimentation.
Model: 9
The addition of this product can meet the frost resistance requirements of concrete after 300 freeze-thaw cycles;
Model: 10
Reducing the amount of cement used to increase permeability will result in a significant decrease in compressive strength.
Concrete powder non alkali quick setting agent
Model: 11
The compressive strength of mortar is 6h ≥ 1MPa and 1d ≥ 10MPa.
Concrete liquid alkali free quick setting agent
Model: 12
Low rebound rate; Low dosage; No chlorine or alkali; Good adaptability to cement; Fast setting time; High intensity; Stable storage.